Thursday, December 29, 2011

CIB CUC7281 700TVL Outdoor CCD Bullet Infrared Day Night Security Camera w/ Sony Effio CCD Sensor, Bracket Included

!±8± CIB CUC7281 700TVL Outdoor CCD Bullet Infrared Day Night Security Camera w/ Sony Effio CCD Sensor, Bracket Included

Brand : CIB | Rate : | Price : $75.00
Post Date : Dec 29, 2011 05:19:09 | Usually ships in 1-2 business days


  • 1/3 CCD Vandal Indoor Outdoor Bullet 700TVL High Resolution Color Camera Day / Night Vision
  • Equipped with 1/3 Sony Effio CCD Image Sensor
  • This Camera is CIB Security Exclusive with CIB brand name
  • This ietm is include camera and bracket only. Not included Power Supply and Cable
  • One Year Warranty, full Technical Supports if Purchased Directly from USA Security Store

More Specification..!!

CIB CUC7281 700TVL Outdoor CCD Bullet Infrared Day Night Security Camera w/ Sony Effio CCD Sensor, Bracket Included

Low Cost Remington Hair Clippers Discount First Years Mipump Double Breast Pump Cheap Airfares To Geneva On Sale

Sunday, December 11, 2011

Vonnic C107W 1/3-Inch Sony CCD 550 TV Lines 60 IR LED Night Vision 200 Feet 2.8-12mm Varifocal Bullet Camera (White)

!±8± Vonnic C107W 1/3-Inch Sony CCD 550 TV Lines 60 IR LED Night Vision 200 Feet 2.8-12mm Varifocal Bullet Camera (White)


Rate : | Price : $99.99 | Post Date : Dec 11, 2011 20:06:07
Usually ships in 24 hours

Vonnic C107W 1/3" Sony CCD 550 TV Lines 60 IR LED Night Vision 200 ft 2.8-12mm Varifocal Bullet Camera White. Specifications Image Sensor 1/3” Sony Super HAD CCD Horizontal Resolution 550 TV Lines Scanning system NTSC Lens 2.8 - 12mm Varifocal Minimum illumination 0 LUX (IR ON) S/N Ratio More than 48dB White Balance AUTO Auto Gain Control AUTO Electronic Shutter 1/50(1/60)-1/100,000 Sec Gamma Correction 0.45 Water Resistance Weatherproof IP66 Power Consumption 500mA Power Supply (Not Included) DC 12V Infrared LED 60 Lights (5mm) IR Distance 200ft (61m) View Angle 110° - 20° Product Dimension (WxDxH) 9.1x4x7.5in (23x10.1x19cm) Package Dimensions (WxDxH) 10.9x4.8x9.4in (27.8x12.2x23.8cm) Package Weight 2.6 lbs (1.2kg)

Price Bathroom Heater Light

Saturday, December 3, 2011

CCTV Camera - Do-It-Yourself Installation Guide

!±8± CCTV Camera - Do-It-Yourself Installation Guide

Introduction:

This guide is written for those who do need video security and can't afford costly installation services, or if the CCTV installer is not available in your area - the later is more common than one could think. We will cover most common security equipment types, as it is virtually impossible to go over such a wide rang of different security cameras and recording/video processing equipment available on the market.

I assume anyone considering do-it-yourself CCTV installation has basic knowledge of wiring techniques and practices. I am not to be held responsible or liable for damages to the equipment due to mishandling or misuse. Remember; during the installation always pay attention to safety. Working at heights and using tools can be dangerous, please follow all safety practices. Lets jump right to it now.

Planning: First step of any camera installation is to plan camera and monitoring equipment locations. When planning for camera locations please take in consideration light condition, never install cameras in low light room pointing straight into the sunny area it will add glare to the picture, even if your camera has back light compensation it will not be enough. Use infrared cameras for very dark conditions and/or B/W cameras with as low LUX number as possible. I am not going to discuss proper equipment selection, as this was subject of my last article.

Selecting the best possible camera locations is not easy, and will directly impact the camera views. Besides light conditions, the distance to the monitoring object is equally important. There are many different types and focal lengths of lenses; your selection will depend on light condition and distance from the camera to the monitoring object. In small rooms around 500sq. ft. cameras with standard 3.6mm lens should be OK. Keep in mind that most bullet and board type of cameras come with 3.6mm lens, the greater the distance to the monitoring object the longer focal length of the lens will be needed. There is no ease way of judging lens selection, you can eider guess or buy professional lens selector tool.. Alternatively you can start with your lens selection and if needed get longer or shorter focal length lens later. Other option as far as lens selection goes, is to use variable focus lens, which is very versatile approach and takes the guess out of the lens selection process. For those who do not know what variable focus lens is, it's basically adjustable focal length lens that will allow to change the focal length within specified range, fore example: 2.6mm - 8mm or 5mm - 50mm.

To maximize cameras coverage and get the most out of the CCTV system for least amount of money minimize number of it by placing cameras in strategic places, unless complete area coverage is needed. Avoid overlapping camera views, do not install them with source of light directly in front of it and do not place infrared cameras pointing at each other to eliminate risk of overexposure. These are the most common mistakes that need to be avoided. After the initial camera locations are predetermined, lets look at cable placement. Make sure that it is actually possible and practical to run cable to each location, if running the cable to any camera location is for some reason impossible opt-out for alternate location.

Wiring: The most time consuming and important part of any camera installation is wiring. Plan your installation carefully to minimize cable lengths and insure good quality video signal. Never run cables alongside high power electrical lines, at least 12" spacing between video cable and power lines are recommended. Keep the cable lengths below 400ft and use good quality cable, most people take the cable for granted, but it is actually very important aspect of any installation. The CCTV system is only as good as its weakest component. I usually stick with RG59U with power Coleman cable (YES it is US made) sometimes called Siamese type cable. It is combo cable and will transmit video and power, as an alternative it is sometimes possible to use less expensive RG6 standard coax cable with separate run of 18/2AWG for power.

The Siamese cable is less bulky and easer to run, distribution power supply is recommended with this type of cable as power will be supplied from common place right next to monitor and recording equipment. Using Siamese cable makes for more clean and neat installation, as only one line is required for each camera. Running RG6 cable with separate run for power is the likely solution if power outlets are available near each locations. In this case individual plug in power supplies are used to power them with power cable running as separate and independent line to the camera. Both types of cables are available at dvrexperts. When running the cable it is good practice to leave couple of loops of extra cable at both camera and monitoring locations. This extra length of cable is needed if in the future monitoring or location will have to be moved slightly. After the cable is in place, the labor-intensive part of installation is over, now we can get to the fun part of installation.

Camera mounting: Most s come with mounting screws and bracket included, attach the bracket firmly and remember that in some cases different brackets than the ones supplied with the cameras could be needed.

Attach the camera to the bracket and adjust the position approximately at this time, we will come back to it later. Typical security camera is powered by 12VDC or 24VAC and power input type is screw or push terminals or 2.1mm plug. Power connection will differ for each type of power supply and input style. Most cameras are 12VDC, in this case it is important to observe polarity or you may damage the camera. The power cable has two conductors and in most cases it will be red or white and black cable. Use the red or white for positive and black for negative terminals. If it has screw or push terminals power input connect the cable directly observing polarity, if it is 2.1mm plug, a special 2.1MM Female DC Plug with Flying Leads have to be connected to the cable again keep attention to polarity. The 24VAC connection is very similar, with one major difference - polarity is not important.

Next step will involve some special tools and accessories. We will attempt to go over installation process of BNC crimp-on video connector, I will post video demonstration of BNC crimping techniques shortly so please check the web sites mentioned in this article often.

Steps:
1. Remove about 1/2-inch long outer jacket from the end of video cable exposing braid.
2. Slide the crimping barrel onto the cable with the larger diameter facing end of the cable.
3. Pull the braid backwards exposing the inner isolator material and remove 3/8-inch of it so you have now core conductor exposed.
4. The main part of BNC connector has a small hole on one side; push the exposed core conductor of the cable into that hole as far as it will go.
5. Push all the braid folded backwards in step 3 onto the BNC connector and spread the braid evenly around connector.
6. Push the crimping barrel onto the BNC connector all the way.
7. Using crimping tool, squeeze the crimping barrel onto the BNC connector, now the cable braid is compressed in between crimping barrel and BNC connector assuring secure connection.

BNC connector is on, lets hook it up now and repeat the steps for each camera, if you have purchased 16 camera system you may want to get some coffee first.

Monitor and recorder connection:

Cameras are on, its time to make final connections. I will focused on standard CCTV monitor, standalone DVR recorder and distribution power supply, as this is the most popular and likely solution for most CCTV installations.

First we have to install BNC connectors on this side as well - its time for that coffee again. It is good idea to make room for monitor and recorder now and setup some type of desk, shelf or rack to place all the equipment on.

We need the monitor and recorder in place so we can determine proper power supply location. Power supply should be mounted within couple of feet from the DVR video inputs. After power supply is secured separate the power conductors from the Siamese cable, and run it to power supply. Like we did with the cameras if 12VDC power is used, we need to watch the polarity, each terminal on the power supply is marked, so there should not be any doubt. Make sure the power supply is not plugged in to the power outlet yet.

Connect video cables to the DVR video in ports. We need one video cable to connect the DVR with the monitor, if you do not have one you may cut piece of Siamese cable separate the power conductors from it and install BNC connectors on both ends, you now have the cable. Connect the DVR monitor out port to monitor video in. We are almost ready to power up everything; there is only one more thing to take care before we do that.

We need to protect the equipment from power spikes by plugging it into power conditioner or better yet, buttery backup unit. If the installation location is experiencing frequent power outages, the backup unit is strongly recommended. To extend the backup time only plug the DVR and camera power supply to the backup unit and the monitor to regular power strip, this way if we do loose power for some time the DVR and cameras are still functioning as normal while monitor is off. Turning off monitor will not affect DVR and cameras in any way; it is actually good habit to turn the monitor of if not used to extend its life.

Power on and final adjustment: Yes... we are now ready to power it up for the first time, if this is your first installation it may be nerve-racking experience. Start with turning the cameras power supply on, turn the monitor on as well followed by DVR system. The stand-alone DVR, after self-test will show cameras or setup menu on first power up depending on your model.

To setup the DVR refer to the manual for proper settings. Go over each camera view to determine if the view is actually what you want, hardly ever it will be without additional readjustments. To properly and easily adjust the positions, the test monitor will be very handy if not essential tool. Go to each camera location and connect the test monitor to adjust the position to your preferences, if satisfied secure camera bracket adjustment screws - we will not go back to this camera anymore.

Conclusion: Congratulations! You have just completed your most likely, very first installation of CCTV system. Visit our store fore more information on surveillance cameras, DVR recorders, tools and accessories.


CCTV Camera - Do-It-Yourself Installation Guide

Promotional Ovation Ae128 Coupon Roland Rp101

Friday, November 4, 2011

Security Camera System - Buyer's Guide

!±8± Security Camera System - Buyer's Guide

Although the application of CCTV security have not changed very much over the past years, the tools and equipment have significantly. Cameras became smaller, cheaper and better, but the major breakthrough happened in recording equipment.

Therefore many customers shopping for complete CCTV monitoring and recording systems are confused by such a verity of available products. Goal of this article is to guide buyers toward best possible and most economical type of CCTV equipment, based on intended implementation and requirements.

Selecting the right cameras.

It is virtually impossible to describe all types of available ones in this short article. We will focus our attention on most popular and widely used camera types instead.

CCTV security cameras produce images using CMOS or CCD (Charge Couple Device) chips. Tiny, very low price CCTV cameras usually use CMOS technology, produce poor quality images and have very poor light sensitivity. Decent quality CCTV cameras use CCD technology. The size of the CCD chip is normally 1/4", 1/3" or 1/2". As a rule of thumb, the larger the size, the higher the quality of the image produced and the higher the price. However, higher density 1/4" and 1/3" CCD chips can now produce as good an image as many 1/3" or 1/2" chips.

The number of TV lines in the security camera image is a measure of picture resolution (sharpness). The larger the number of TV lines, the better the resolution and hence, overall picture quality. Standard resolution camera may have 350-380 lines, over 400 TV Lines is generally considered good resolution while over 500 TV lines is considered high resolution. B/W chip cameras produce greater resolution and better light sensitivity, therefore suitable for use in dark areas where light conditions are poor most of the time.

On the other hand color cameras offer more realistic and natural picture. CCTV cameras are usually divided into different types based on the body of the camera used.

Professional grade cameras.

Have box type body with the ability to use different types and size of lenses. Exchangeable lenses enable this camera, to monitor objects from virtually any distance. Although for indoor use, they can be used for outdoor when combined with weatherproof housing. They are considered to be the most flexible and widely used by professionals for commercial installations.

Bullet cameras.

Bullet cameras are, as the name suggest contained inside bullet shaped housing.

Most bullet cameras are weatherproof and sealed without the ability to use different lenses. Great advantage of bullet camera is the small size and integrated design, some bullet cameras will even have infrared LED future built-in. Infrared technology is simply LED light in infrared spectrum (not visible to human eye). This light will illuminate viewing area, making possible monitoring in complete darkness. This is great future, but it only works up to certain distance (usually between 10 and 50 ft. depending on model) Vary simple to install and estheticly designed, bullet cameras are great choice for residential and do-it-yourself installations where monitoring objects are within about 25ft from the camera location (with standard 3.6mm lens).

Board Cameras.

Board Cameras are basically fixed lens mounted on a circuit board. These cameras may be packaged in a small case (Mini Cameras) or dome (Mini Dome) or simply sold unpackaged, for mounting by the purchaser. Lenses in these are either of a normal industry aperture or a "pinhole" lens of very small aperture. Pinhole lens cameras are often called "spy" cameras and may be mounted in a concealed way for covert surveillance purposes. The most popular examples of covert board ones are smoke detector and motion detector cameras.

Since the lenses in board cameras are pre-mounted, have a fixed iris and are usually of a short focal length (i.e. wide angle), their flexibility of usefulness is limited. However, this type of camera can provide a low cost solution in the right situation, particularly in a home environment. We have shortly described most popular types of cameras, lets now discus, how and where they mite be used.

Professional types with C/CS mount lens attachment generally offer best performance and many important futures, like lens control output, Back Light Compensation and many more...

Distance from monitoring object to the camera is not an issue, that is why ability to select different lenses, based on location is so important. Installation is bit complicated and professional installation strongly recommended. We recommend this type of security cameras for commercial installations.

Most Bullet cameras in comparison, do not offer high resolution and lens selection flexibility, but are likely to be weatherproof, some will have infrared light built-in and most of all they are relatively easy to implement. They usually come with 3.6mm lens witch are considered to be suitable for most standard installations (good for covering small to medium size room or equivalent).

For larger rooms or longer distances, cameras with 6mm or higher lens may be required. They are great choice for any do-it-yourself installation.

Board cameras in contrast are widely used in covert camera installations, sometimes called Spy Cameras. Many are basically board ones with built-in transmitter. We are not going to go into wireless cameras right now, as this would be enough material for completely new article.

Board cameras are sold as plain circuit board, for integrating into hidden camera devices. They are also available in dome housing, as vary popular Dome Camera or integrated with Smoke Detector, Motion Detector, Exit Sign and so on. Most also come with 3.6mm lens although some will allow lens to be replaced.

Over the time, most practical design has been Dome Camera with its aesthetic appearance it blends into surroundings, especially with drop down sealing, great for use in stores, lobbies, gas stations and other public places. Practical solution for covert installation are also, Motion and Smoke Detector cameras, they are absolutely not substitute for your security alarm or fire protection. They should always be selected based on the location of the camera (inside/outside), distance from the monitoring object, light condition and budget.

When shopping for security cameras, customers are faced with the fact that they will need to select one or another recording device.

The days of well-known CCTV time-lapse VCR recorder are almost over.

Although some customers still prefer this old fashioned recording solution, it is well worth to invest some extra money to purchase a good quality digital video recorder (DVR). Digital recorder transfers analog camera video feed into digital format, and stores it on hard drive. There are two major types of digital recorders on the market right now.

PC Based Systems.

A special board and software installed on the computer will allow camera inputs and store video on the hard drive.

Many people are under the misconception that personal computer with additional hardware installed, will do the job. This explains the hundreds of companies that have hung up a sign, taken out some ads and begun working out of basements and garages, holding themselves out to be DVR manufacturers and security specialists. The main problem with this type of CCTV recorders lies in the main component of it... Yes, it is a computer, designed to do unlimited tasks, but non well. The truth is that any computer based digital video recorder is, and will always be vulnerable to software crashes, hang-ups, system instability, virus related problems etc...

Stand Alone Systems.

Very similar in appearance and control functions to standard VCR recorders, are truly remarkable devices. Most video processing is done by hardware, therefore eliminating system crashes, video is also stored on hard drive in digital format. The basic operating system, usually Linux, is permanently stored on special processor, witch is impossible to overwrite or corrupt. Designed and manufactured with single application in mind, it is by far better in performance and reliability to its PC based rival.

Some DVR systems will even have remote monitoring capability, useful when monitoring is required in different locations through Internet or network. Most important futures to look for when selecting the right DVR recorder are motion detection and frame speed. The higher the frame speed the more fluent video recording. Motion detection will allow recording video from each camera only when motion is detected; this is great for extending video recording time.

Security Monitors.

Video from Security recorder could be displayed on regular TV monitor. It is OK to do it this way, for baby monitoring or residential application, when quality of the picture is not that important. However for professional installation, security monitors are as much important as cameras. They offer extended life of picture tube (necessary with any static picture, that can cause picture burnout) and much grater resolution.

Cables and wiring.

Finally any camera installation will require proper wiring. Good quality cable will prevent video degradation over long distance runs. It is recommended to use RG59 or RG6 coaxial cables as it is fully shielded and will prevent video loss up to 400 ft. Coaxial cables will require BNC connectors and proper installation possibly done by experienced technician. In short runs plug and play non-coaxial cables with factory installed BNC connectors may be used (up to 150 ft.). The plug and play cables are easy enough to install by not experienced users.

Cables for CCTV cameras consist of two cables bundled in one jacket. One cable for video and one for power delivery.

Conclusion.

Every CCTV system is as good and reliable as its weakest component. With this in mind, investing on highest quality and performance cameras, while purchasing low performance recorder, from economical and practical standpoint just does not make sense.

For example, why use CCTV cameras with 500 TV lines of resolution with monitor that offers only 380 or less. All the benefit of high-resolution camera is affectively sacrificed by limited capability of monitor. Asking questions is important before purchasing video security system, and your vendor will probably be able to give more details and recommend equipment for specific needs and requirements.


Security Camera System - Buyer's Guide

Surefire Suppressors Discount Microdermabrasion Machine Home Reviews


Twitter Facebook Flickr RSS



Fran�ais Deutsch Italiano Portugu�s
Espa�ol ??? ??? ?????







Sponsor Links